Time for a new file. This one, as you may notice, is a paper-cutting pop-up file for all you card makers out there!Â
Sadly, my poor Silhouette Cameo has been sitting unused for a long time. After my laser arrived, I have neglected paper crafting despite the fact that I still enjoy it. Paper has an allure to it. So many possibilities.Â
What better time to pull out your cutting machine and make a card than Valentine’s Day? This is a very simple file to cut. It cuts really fast, the tricky part is folding it correctly. I recommend scoring the center and folding it first. Then, you can accordion fold the sides and your card pop-up insert is all set to put in your card and add a nice sentiment.Â
If you need a good sentiment to add to your card, check out 1 Corinthians 13. Best love passage there is, if you ask me.Â
Love Never Fails
Love is patient and kind; love does not envy or boast; it is not arrogant or rude. It does not insist on its own way; it is not irritable or resentful;it does not rejoice at wrongdoing, but rejoices with the truth. Love bears all things, believes all things, hopes all things, endures all things.
I am back. After a long hiatus from my blog, I feel as though my life is once again in a place where I can spend time posting to my blog, and doing what I love – designing new SVG files for you! Perhaps a glut of Christmas svg files, since December is fast approaching!
Perhaps you clicked on a Pinterest image with these cute little wooden Christmas trees, or you stumbled here by accident. However you came to be clicking around my site, welcome! If you haven’t been here before, allow me to introduce myself. I am Kristin, a lover of creating, wife of an actuary, mother to three beautiful young daughters, and a math and programming enthusiast too.
Likely the 3 biggest reasons I have not posted for so long!
I have a big yellow laser, which I love. My poor Silhouette Cameo has been gathering dust in the closet as I have a new favorite in the house (or rather garage). I have pulled it out for vinyl a few times, but I think I am overdue for a Cameo project, so let me know if there is a file you are dying to see and maybe I can make it happen!
My big yellow laser in action!
Christmas trees are so versatile in crafting, so I am putting a few Christmas Tree Designs out here for you. These are the simple ones for you and your Cricut or Cameo, or perhaps your Glowforge and a wooden sign? These Christmas trees would also work great in vinyl on a t-shirt for your holiday festivities with the whole extended family!
Simple Christmas Tree SVG files for your Christmas crafting.
If you like these, be sure to check out my 3D Christmas Tree files that I designed for 1/8″ material like Baltic Birch. For the trees in these photos, I used a green gel stain on the wood, cut them out, and slipped them together. As a bonus, you can slide them apart for easy storage!
Hope you enjoy these fun Christmas Tree SVG files. Let me know what else you want to see as I am always hunting for new ideas.
In this post, I assure you, there is a nice easy Father’s Day Card for you to make. It is a very cute simple design, that is really easy to throw together last minute. That is my favorite kind of card SVG. Don’t get me wrong, the complicated ones are really cute when people make them, but they take waaaaay more effort and time than I am typically willing to invest.
Where have I been? I haven’t had much time to devote to my website for the past month or so, but not because I am not creating. Is it just me, or is it really difficult to not be creating? I have a really hard time putting projects down to get the daily chores done.
LASER LASER LASER
I haven’t been here because I have been in my hot garage drooling over my latest crafting toy. What is so exciting that I am sweating away in my garage in the summer in Texas?
MY NEW LASER CUTTER!
Yep. That is right. I bought a laser cutter! It is absolutely awesome and to top it off it is yellow, my favorite color. It is a 60Watt Chinese Laser purchased on Ebay, in case you wanted to know. I was so worried that I wouldn’t be able to set it up when it came, but it wasn’t actually too bad.
Now, I am designing and cutting files on wood instead of paper! It is really really awesome. You may get tired of hearing this, but it is awesome. Yes, awesome.
Anyhoo, enough about my really awesome yellow laser, which needs a cute name.
Father’s Day
On to the point of this blog. Father’s Day is upon us again. I have a lot of cute cutting files already here for you to use or be inspired by. Take a look if you like.
However, I wanted something simpler and more generic this year. I am planning on sending one to my dad, and as you can see, my daughter’s already absconded with the other’s I made to give to their dad. My six-year-old added artwork and it turned out adorable too.
So, here is this year’s Father’s Day SVG Freebie. The download link is right below the image. The file has three parts. The main card, two optional shadow components, and an overlay. The overlay goes over “happy” and “day”, and creates a outline later for “fathers”. Let me know if you have any questions with it. If you use a standard 12×12 paper, you can make it approximately 4″x6″.
Happy Mother’s Day to all my fellow mother’s out there. (Don’t worry, if you aren’t a mother, we won’t ban you from crafting.)
Have you been crafting away during this time of quarantine? I have certainly been trying to, but three little girls have me running around doing things like feeding them, washing their clothes, cleaning up messes. I mean, the nerve. Just kidding of course, they are wonderful little people to have around but sometimes you just want to be quarantined alone!
On that same note, I certainly can’t be the only one who plays deaf when my children are running around the house shouting “MOMMMMM”. I figure they can get a little exercise before I reveal my top secret location. Mwhahah!
All of this, of course is super on topic as my freebie today is a a Mother’s Day card. Yay! Although, it is not a card that screams Mother’s Day, so you could definitely use it for other occasions. If you do, I would suggest not bothering to use the “Happy Mother’s Day” sentiment. Or do. I am not your mom.
Whew! Apparently I am feeling rather sarcastic today. Hopefully you are staying healthy and sane. Enjoy making this beautiful Mother’s Day Card.
While you are here, be sure to check out the Mother’s Day Card I posted way back when I first started this site. My images have come a long way since then, but the file is still super awesome as well.
Goodness, I forgot to mention one super exciting thing. I cut this card out on my new super duper awesome laser! Yep. I got a laser. A giant yellow CO2 Laser. I have been eyeing them for a long time and it actually happened. And as a bonus, I figured out how to set it up and get it to actually work. I suppose it is my Mother’s Day gift for the next decade.
And now for the actual freebie. I have included a “Happy Mother’s Day” sentiment that I made to go with mine. I don’t like fussing with the little letters, so I welded it all together. That way, just one piece to cut and glue. Laziness for the win. Happy Mother’s Day!
Please enjoy this COVID-19 Coronavirus 2020 SVG file. I designed the virus icon from a diagram of the actual virus cell. (I’m not sure if cell is the technically correct word here, but it has been a while since I was in Biology class!)
Health is so important to the daily enjoyment of our lives. This Coronavirus outbreak has hit our world so very very hard. I sincerely hope that you and yours are doing well and are well provided for.
With mostly everyone at home, I thought it might be enjoyable to send out cards to those you love to let them know you are thinking of them. That was the inspiration for this card. It is intended as a little bit of humor in the midst of a scary time.
Wishing you well. Here is the Coronavirus 2020 COVID-19 SVG FREEBIE!
So, the world has gone mad. I mean, doesn’t it feel almost surreal?
A world wide pandemic is something I thought I would only see in movies and board games. It really never occurred to me that it would actually be something to touch and even deeply affect my day to day life.
First, Here is to hoping that this finds you and yours safe and well supplied for all your needs. Our family is stocked for a couple weeks and ready to hunker down. My girls and I are not especially vulnerable to the virus, thankfully, but my husband does not have a strong immune system.
All anyone can do is be prepared and pray!
So, how are things in your neck of the woods? Lots of hand-washing here and we have enough toilet paper and soap too! 😉
Hopefully, these couple SVG files will be a welcome diversion for you.
Layered Bee File Posted on Etsy
If you happened to catch my last post, you saw that I created an adorable layered bumble bee file. I used it as a baby shower gift, but I have had at least two people purchase it for a beekeeper they know.
Anyhow, I did polish up the file and get it posted on Etsy. You have to add your own text, but the rest is ready to cut!
Since we all have our family and their well-being on our minds, I thought a quick couple files for Mom and Dad would be perfect. Mother’s Day and Father’s day aren’t too far away. Get your cards done early.
While I envision these as layered card fronts, but you could definitely do more with them.
Here are some of my past posts on Father’s Day Cards and Files.
I have a free Bee SVG for you tonight. Looking at this smiling bee is definitely cheering me up a bit. While I am glad to be back here posting a new file for everyone, it has been a rough week here my neighborhood.
It has been so heavy on my heart, especially having to share the news with my young daughters. They are so sweet though, and they were reassuring me that she was not dead, but alive with God in heaven. Such sweet little hearts children often have.
BEE Layered Paper Art
Anyhow, if you need a little cheering up after such a heavy topic, I have just the file for you tonight. I made this cute little bee for a gift a few weeks ago. It was my first attempt at a layered paper art picture.
Actually, this is how the layered file looked in Adobe Illustrator before I cut it out.
Not that I like to brag, but I do really love how it turned out. Hopefully the recipient did too!
If there is enough interest, I may put the layered file up for sale on my Etsy Shop, but for now I wanted to share the cute little bee. Before I can put it up for sale, I will need to write up instructions and figure out how to make the name layer more customizable.
UPDATE
I managed to get the layered file cleaned up and posted on Etsy! Find it HERE.
The one thing I would change were I to make it again is to put a little more support behind the middle of the name layer as it was a wee bit wobbly.
Free BEE SVG and hand-lettered sentiment
Also, because I felt the little bee was lacking something, I hand-lettered a cute birthday message to go with it. Hopefully you enjoy it and are able to make something adorable with it.
I also have some other cute animal files if you want to take a look.
If you are curious, I separated the layers in my picture using cork scraps. I use cork for the backs of the coasters I have on my Etsy Shop, and always have lots of scraps left over. They turned out to be just perfect for the job. Here are some behind the scenes photos of this project.
Well, I sincerely hope you have a wonderful week. BEE happy, and enjoy life.
Tomorrow is February – time for floral hearts! Can you believe that the first month of 2020 has already come and gone? Time always flies, and yet I am still always surprised by it.
In a new twist, I am actually ahead of the holidays in my crafting adventures. I have been working on more Valentine’s day files because they are just so much fun. Of course, there must be hearts and flowers and floral hearts. So, why not hearts with flowers made with a heart?
However, I need inspiration from you! Once I design and cut a file, I don’t always know the best ways to use it. If you use these files, show me please! They could make adorable cards by themselves, but there has got to be something else more creative to do with them. I just don’t know!
Well, I am not totally out of inspiration. They would look good as decals on things. I know, because I made some mock ups on some nifty little mock up freebies I found. Definitely not because I made cups with floral heart decals on them. That would be waaaay tooo ambitious. Maybe tomorrow. Probably not.
Now, I ought to go and make a good pinterest image. Did y’all know that this blogging thing is way too complicated? Can’t I just drop a free file here and call it a day. Apparently not. That wouldn’t be cool. Social media would never find me. I would be in the internet void forever. Yep. Technology is awesome. Technology is lame.
Well, did anyone catch my ‘y’all’? I am living in Texas after all now. However, it definitely does not roll right off the tongue yet and it makes me feel a bit like an impostor.
Anyhow, here is the file. Please enjoy. Hopefully you didn’t read all my text prelude, because I am sure it is lacking in wit and sophistication.
Pretty Pop-Up Hearts Happy Valentine’s Day! Time for a new file. This one, as you may notice, is a paper-cutting pop-up file for all you card makers out there! Sadly, my poor… Read more: Paper Cut Pop-Up Heart SVG Template
I have been working on more Valentine’s day files because they are just so much fun. Of course, there must be hearts and flowers and floral hearts. So, why not hearts with flowers made with a heart?
Love is Patient, Love is Kind. Valentine’s Day is nearly here! Do you need some SVG heart borders? Because it is already February! If you recall, I was hoping to be back… Read more: Heart Border SVG Files for Valentine’s Day
Easy DIY Valentine’s Day Card Made with Minimal Supplies – kwernerdesign blog Happy Valentine’s Day! Do you want to make your own DIY Valentine’s Day Card? Well, Valentine’s Day is approaching rapidly!… Read more: 9 DIY Valentine’s Cards to Inspire You Today
Love February is almost upon us. Looking through all the ideas I have found on cutting files to make, I stumbled upon this lovely little kirigami card. Now, I don’t know where… Read more: Love Card FREE SVG Cutting File Download
February is almost upon us! I have had a long hiatus from this blog in these winter months, but I have really been wanting to post more free files and inspiring projects… Read more: Happy Valentine’s Day – A free SVG sentiment
I’m just now getting around to posting these little projects I made. One was a (very) belated Christmas gift for my parents and the other was first Valentine for my husband from… Read more: Hearts and Handprints
As promised, I am back with a new version of the Valentine’s Day Candy Heart SVG freebies I shared last week. If you missed that one, be sure to check it out and grab the free layered SVG file I shared.
My health is on the mend thanks to some powerful antibiotics. However, I am still mostly deaf in one ear thanks to an ear infection. My sympathies to those who have frequent ear infections or actual hearing loss!
The Dreaded Foil Quill
Well, dreaded might be a bit exaggerated, but I got this fun tool AT LEAST 6 months ago. It has been sitting unopened in my closet. Why? Because I was intimidated by it. While I may have used the excuse of not having time, I truly was worried that I would mess it up and waste all that pretty foil sitting there waiting for me.
If you are in the same boat, pull it out and just try it. Well, if you have the right cords. First, I summoned my courage and attempted to plug it in, but the cord on this thing is only two feet long and needs to be plugged into a USB power port. (The one on the Cameo does not do the job). So, I paid a visit to Amazon and purchased one of these little USB Extension Cords.
All set up and ready to foil.
Once I got my extension cord, I was finally ready. After modifying the file, which I will link to at the end, I was ready to try it out. Not knowing how the Foil Quill would work in the Cameo 4, I put it in the second slot of my Cameo 3 and my cutting blade in the first slot.
While I am no expert in the foil quill as of yet, here is a screenshot of the settings I used, as they seem to have worked quite well! Make sure you select the correct tool for each part and add a Pause between the tools so you can remove the foil.
ATTENTION: Add a pause between the foil and the cardstock cutting!
An important thing to note is that I put a PAUSE between the Foill Quill and the cutting job so that I could remove the foil before it tried to cut the hearts. This actually worked out really well. I was able to remove the foil with a bit of maneuvering without unloading the mat. Then, I simply pressed continue on my computer and it cut the foiled hearts out.
Step 1: Let the Foiling Begin
Checking to see how it came out was the best part. It worked (almost) perfectly. The only issue I had was on not aligning my design and the foil quite exactly. If you look in the image below, a couple of the hearts got a bit cut off in the foiling process. However, I was still happy with the results.
The exciting part!
Step 2: Cut the hearts.
After removing the foiling, I hit continue – it shows up as a button on your computer screen. My Cameo completed the job and cut out the cardstock.
Foil Quill Candy Hearts – Tada!
Foil Quill Card stock Hearts
For the font, I used “LW Tall Sketch” from the Silhouette Store. It is a nice skinny font that looks great in all caps and didn’t have space between the inner and outer edge of the letters.
If you wanted to enhance the 3-D effect of the candy heart, you could shade in the bottom half of each heart with the same color pencil or marker.
Last Tips
Moral of the story, don’t fear the foil quill. It is your friend. The foil quill won’t hurt you (probably); it is hot. Follow the directions and heat it up for 5 minutes or so before you start.
Now, what should I do with these? I feel as though some of you clever card makers could do something really neat with them. I am envisioning some sort of see through container on the front of the card with these inside. Or maybe just a line of them on the front of the card. Who knows? Once I have designed them, my creative juices run out. So, I always love to see what my readers come up with. Drop me a picture if you create something awesome!
Now, hopefully this download link will work. A final tip – cut by the line color or fill – there is a no fill and a fill.
Happy New Year everyone! This year has already had a rocky start in my house. Everyone was down and out with the flu. I got the flu shot. I got the flu. Is anyone else in that boat? Well I am sick. Sick of being sick. I had so many great and energetic ideas. Plans to watch fewer shows, do more crafts, write more blog posts, make more svg files, spend more quality time with my family. Instead, I have been on my back watching shows. Talk about demoralizing!
But now, I am back. Well, almost. I still have a cough that could wake the neighborhood and resulted in my husband giving me dirty looks at the movie theater for my inability to stop my coughing fits. But, my energy is mostly revived. Hooray for 2020!
Has anyone missed me?
So, I have a gut feeling about this one. My blog is not a household staple. No one has been clinging to the edge of their seat wondering where on earth Kristin at Kabram Krafts has disappeared to. If you have, I am enchanted.
The truth is, I have felt sooooo guilty that I haven’t been creating more files and crafts to share with you here. I have been crafting. But, more often than not you will find me trying to catch up on laundry, dishes, and the general chaos of having three young daughters!
In fact, one of my top resolutions this year is to grow this site. To fill it to the brim with lots of crafty ideas and files for you to try.
New Christmas Toys
Did you receive any fun crafty toys for Christmas? Well, I made sure I did. Am I the only one who bought themselves a Christmas gift, wrapped it and put it under the tree? I present to you, my new Silhouette Cameo 4.
So far, I haven’t really put its capabilities to the test, but all the testing for today’s file was done on my new Cameo and it worked like a champ.
Free Valentine’s Day Message Hearts
I have more variations in my head for these. Including trying out the Foil Quill to write the messages on them. Hence, I have titled this post “Part I” – so hold me to it, more on the horizon.
Here is what I came up with. These are three parts per heart. A backing for the text color, the heart with message, and the small shadow to make these look like the small message heart candies. So cute, and yet so very unappetizing. A Valentine’s Day staple. I choose three saying, but it would not be very hard to alter the messages if you know how the fun little path tools work.
For the shadow pieces, I colored each one with the same color to make it slightly darker. I think it might look just as good or better if you hand shade the heart with the words instead of adding the “shadow” paper piece.
Without further ado, here is the free Valentine’s Day message heart svg file freebie for you.
Kabram Krafts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Welcome! Kabram Krafts is now selling premium SVG files at kabramkrafts.com as well as on Etsy. Dismiss
